It is important to purchase a good filling machine, but the most important thing is the daily maintenance. The service life of the machine will be extended and more economic interests will be brought for enterprises if the following points are done in our daily work.
1. When using, the liquid machine should be aerated first and then be connected with the electricity. When stops working, the liquid machine should be cut off the electricity first and then turn off the aeration.
2. There should be reliable grounding device when installing liquid machines.
3. The using temperature for liquid filling machines should be -10℃—50℃.
4. When the liquid machine has worked for 2 or 3 months, the rear cover should be opened and sliding parts should be added into lubricant oil.
5. Always check the decompression and filtration components to see whether the cup is filled with water or not.
6. Silicone Sealing strip and heater strip should be kept clean and without foreign matter in case it affects the sealing quality.
7. Change the broken high-temperature adhesive plaster timely.
8. Do not tilt and hit the machine when packing it and moving with putting down is definitely prohibited.
9. The working pressure for the liquid filling machine should not be adjusted too high.
In our daily work, we just need to use several minutes to check and maintain the filling machine to keep it in the best state. Only in this way can the filling machines bring benefit maximization for enterprises.
